Compare

• Used to perform daily visual air inspection of your rubber insulating gloves
• Designed to fit in any glove bag and can be used with any size glove
• Meets the OSHA 1910.137 requirement for a glove inspection air test and allows for quick inspection

Peakworks® offers a wide range of anchor systems including: single-use/reusable roof anchors, sliding beam anchors, concrete hole anchors and permanent anchors. These anchors can be connected to a variety of materials such as steel, wood and concrete and should be located directly above the worker to prevent swinging. All Peakworks® anchors are built with a minimum tensile strength of 5,000 lbs (22 kN).

• DESIGN – PeakWorks Anchors and Brackets can be connected to a variety of materials such as steel, wood and concrete and should be located directly above the worker to prevent swinging
• FEATURES – Built with a minimum tensile strength of 5,000 lbs (22 kN). They meet or exceed CSA Z259.15 and ANSI Z359.18 standards and OSHA requirements

• CAPACITY - Peakworks anchors have a 310 lbs. (141kg) weight capacity (combined weight of person, tools, clothing, etc.)

• OPTIONS - Temporary roof anchor brackets are available in 3 types - V8229001: Single-Use Roof Bracket, V8229100: Reusable Roof Anchor Bracket, V8229104: Stainless Steel Reusable Roof Anchor Bracket

• Model RB-9800 needs to be installed either at the peak of a roof or if used on a flat roof needs to be 5,000 lbs. rated at the point of installation